Mounting On Metal; Technical Specifications - Siemens SIMATIC Ident System Manual

7.7.3

Mounting on metal

Mounting on metal
h
Figure 7-15
Note
If the minimum guide values (h) are not observed, a reduction of the field data results.
In critical applications, it is recommended that a test is performed.
Flush-mounting
Flush-mounting of the MDS D160 in metal is not permitted!
7.7.4

Technical specifications

Memory size
Memory configuration
•
•
•
Storage technology
Memory organization
Protocol
Data retention (at +55 °C)
SIMATIC RF200
System Manual, 09/2013, J31069-D0227-U001-A8-7618
≥ 25 mm
Mounting of the MDS D160 on metal with spacer
Serial number
Configuration memory
Application memory
128 bytes
8 bytes (fixed code)
•
8 bytes
•
112 bytes
•
EEPROM
EEPROM 128 bytes gross
112 bytes net capacity
Only for the RF300:
When using the OPT area, 16 bytes of it must be
subtracted in 4 byte blocks
According to ISO 15693
10 years
Transponder
7.7 MDS D160
183