Replacing The Solenoid Assembly; Removing The Solenoid Assembly - Flight Medical Innovations 60 Series Service Manual

Removing and Reinstalling Modules

Replacing the Solenoid Assembly

3. Connect the silicon tube attached to the female connector to the inner fitting on
the redundancy solenoid.
4. Using the other silicon tube, connect the Solenoid assembly to the outer fitting on
the redundancy solenoid.
Replacing the Solenoid Assembly

4.19.1 Removing the Solenoid Assembly

To remove the solenoid assembly:
1. Remove the ventilator cover.
2. For iO internal mixer model - Remove the O
2
3. Remove the 2 screws securing the O
4-34 | FLIGHT 60 Service Manual
Figure 60 – Connecting the Silicon Tubes
Figure 61 – Remove O
leak sensor.
2
leak sensor bracket. Remove the bracket.
2
leak sensor bracket
2