Flight Medical Innovations 60 Series Service Manual page 42

Removing and Reinstalling Modules
Replacing the Power Supply
6. Remove the power supply.
7. Detach the power supply from its bracket by unscrewing the three Phillips screws
securing the bracket.
Figure 25 – Detaching the Power Supply from Its Bracket
To install the power supply:
 Follow the above procedure in reverse order, paying attention to the following:
 The Power-Supply bracket fits under the power board bracket
 Be sure not to apply pressure to the solenoid assembly during this procedure
 Connect the wires according to the following diagram:
4-12 | FLIGHT 60 Service Manual
Figure 26 – Bracket Positioning