Flight Medical Innovations 60 Series Service Manual page 38

Removing and Reinstalling Modules
Replacing the Power Board
Figure 17 – Removing Screw Connecting Power Board to Power Board Bracket
Do not hold the power board by its components. To pull the board out,
hold the grooves. Refer to the figure below for correct positioning.
Figure 18 – Lifting Power Board from Ventilator Base
7. Holding the board by the grooves, carefully pull the board out by lifting up slightly
on one side and then the other, continuing to alternate sides until the board is
released from the socket.
4-8 | FLIGHT 60 Service Manual