Flight Medical Innovations 60 Series Service Manual page 45

Removing and Reinstalling Modules
Replacing the Front Panel Assembly
Figure 30 – Flat Flex Cable going to P16
4. On the underside of the ventilator, unscrew the three Torx screws securing the
bottom of the front panel.
Figure 31 – Loosening the Torx Screws Under the Front Panel
5. Remove the Torx screws from the front panel brackets (one on each side).
Carefully slide the front panel outwards to allow access to electrical cables and
silicon tubes.
Flight 60 Service Manual | 4-15