CKD AX1000T Series Manual page 3

1. Shorter tact time for your equipment
Reduce time loss with improved response
"Instant positioning"; positioning time reduced by 75%.
Reduce start up time by linking with peripheral component
Easier to link with other components with the A/B phase encoder output.
2. Improved usability
Optimal tuning in no time
Newly added semi-automatic tuning function
Increased I/O signals
Newly added ready output, servo on, etc.
3. Safety standards
IEC standards, category 3 for "safe torque off function"
4. Conformity marks
UL/cUL, CE compliant
5. Downsized GH/WGH type drivers
65% smaller volume, 50mm shorter depth
Reduced tact time with quicker response.
Easier setup
Adjustment software included (AX tools)
Control is on even when the motor is off
Separate motor and control power supply
Bringing safety by linking to the inspection machine.
Detect the open/close of
the door and shut off power.
* Risk assessment as an entire equipment is * Risk assessment as an entire equipment is
necessary to meet safety standards. necessary to meet safety standards.