Annex I: Independence Of The Modules - Zennio MAXinBOX FC 0-10V FAN User Manual

ANNEX I: INDEPENDENCE OF THE MODULES

The following figures illustrate how the communication objects and group addresses of
the fan coil and the outputs modules should be linked depending on the system to
control.
Two-Pipe Fan Coil System
[FC x ] On/Off
[FC x ] Control Variable (Cooling)
[FC x ] Control Variable (Heating)
[FC x ] Mode
Four-Pipe Fan Coil System
[FC x ] On/Off
[FC x ] Control Variable (Cooling)
[FC x ] Control Variable (Heating)
[FC x ] Mode
It is worth emphasising that the two fan coil modules are completely independent
of the analogue and binary outputs modules. It is up to the integrator whether to
control the fan coil module together with the built-in outputs modules (by grouping their
http://www.zennio.com
] Output Value (Control)
[AO
Y
[FC x ] Fan Speed
Fan Coil
Module
[FC x ] On/Off (Status)
"x"
[FC x ] Valve Control
] On/Off
[O
Z
] Output Value (Control)
[AO
Y
[FC x ] Fan Speed
[FC x ] On/Off (Status)
Fan Coil
[FC x ] Valve Control
Module
(Heating)
)
"x" ] On/Off
[O
Z1
[FC x ] Valve Control
(Cooling)
] On/Off
[O
Z2
MAXinBOX FC 0-10V FAN
Analogue
Output "y"
0-10 VDC
Binary
Output "z"
On/Off
Analogue
Output "y"
0-10 VDC
Binary
Output "z1"
On/Off
Binary
Output "z2"
On/Off
Technical Support: http://support.zennio.com
] Output Value (Status)
[AO
Y
] On/Off (Status)
[O
Z
] Output Value (Status)
[AO
Y
] On/Off (Status)
[O
Z1
] On/Off (Status)
[O
Z2
34