Product Certifications - Emerson Rosemount 644 Quick Start Manual

May 2019
4

Product certifications

Rev: 0.1
4.1 European Directive Information
A copy of the EU Declaration of Conformity can be found at the end of the
Quick Start Guide. The most recent revision of the EU Declaration of
Conformity can be found at Emerson.com/Rosemount.
4.2 Ordinary Location Certification
As standard, the transmitter has been examined and tested to determine
that the design meets the basic electrical, mechanical, and fire protection
requirements by a nationally recognized test laboratory (NRTL) as accredited
by the Federal Occupational Safety and Health Administration (OSHA).
4.3 North America
The US National Electrical Code
(CEC) permit the use of Division marked equipment in Zones and Zone
marked equipment in Divisions. The markings must be suitable for the area
classification, gas, and temperature class. This information is clearly defined
in the respective codes.
4.4 USA
4.4.1 E5 USA Explosionproof, Non-Incendive, Dust-Ignitionproof
Certificate: [XP & DIP]: 3006278; [NI]: 3008880 & 3044581
Standards: FM Class 3600: 2011, FM Class 3615: 2006, FM Class 3616:
Markings:
Certificate: 1091070
Standards: FM Class 3600: 2011, FM Class 3615: 2006, FM Class 3616:
Markings:
Quick Start Guide
®
2011, FM Class 3810: 2005, ANSI/NEMA
ANSI/IEC 60529: 2004
XP CL I, DIV 1, GP B, C, D; DIP CL II / III, DIV 1, GP E, F, G; T5(–
50 °C ≤ T ≤ +85 °C); Type 4X; IP66; See I5 description for Non-
a
Incendive markings
2011, UL Std. No. 61010-1-12, UL Std. No. 50E, CAN/CSA
C22.2 No. 60529-05
XP CL I, DIV 1, GP B, C, D; DIP CL II / III, DIV 1, GP E, F, G; T5 (–
50 °C ≤ T ≤ +85 °C); Type 4X; IP66;
a
(NEC) and the Canadian Electrical Code
Quick Start Guide
®
250: 2003,
25