Roland R1000 Series Manual page 104

Start-up
If the entered password is incorrect then the cursor returns to the first digit of the password and the
input must be repeated. The input of the password can be aborted by pressing the MENU button.
configuration
program param.
Fig. 42: Selecting the configuration mode
Available configuration modes:
• Configuration system parameter
• Configuration program parameter
• Data backup
System parameters are general adjustments (e.g. language).
Program parameters are application specific adjustments (e.g. input of nominal sheet thickness).
Pos : 58 /D oppel blech/Geräte/E20/7 Inbetriebnahme/Parameter (Pr ogramm-) @ 1\mod_1192448721875_501.doc @ 4922 @ 233 @ 1
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
104
Double Sheet Detector R1000 series E20
A fault is generated if PLC commands are executed while entering the
Note:
password or changing parameters.
After exiting the configuration mode the password remains active for five
Note
minutes. Thus other configuration adjustments can be made, without re-
entering the password. If no key is pressed (while in the menu level), then
the program changes to the measurement mode
Manual
B0046991 / Rev. 1.6