Serial Plate; Declaration Of Conformity; Manufacturer's Address; Applied Standards - Schaerer Coffee Joy Operating Instructions Manual

www.schaerer.com
10

Serial plate

The serial plate is located behind the drip tray on the left side
► In the event of a fault or warranty claim, specify the information on the serial plate.

Declaration of conformity

Manufacturer's address

Manufacturer
Schaerer AG
P.O.Box 336
Allmendweg 8
CH-4528 Zuchwil, Switzerland
T +41 (0)32 681 62 00
F +41 (0)32 681 64 04
info@schaerer.com
www.schaerer.com

Applied standards

The following harmonised standards have been applied:
Low Voltage Directive 2006/95/EC
• EN 60335-1:2002 +A1 +A11 +A12 +A13
+A14 +A15 +A2
• EN 60335-2-75: 2004 +A1 +A11 +A2
+A12
• EN 62233:2008
Safety
• IEC 60335-1:2001 +A1 +A2
• IEC 60335-2-14:2006 +A1
• IEC 60335-2-15:2002 +A1 +A2
• IEC 60335-2-75:2002 +A1 +A2
• IEC 62233 Ed1:2005
The stated manufacturer declares herewith that this machine complies with all relevant stipu-
lations of the specified EU directives. In case of any modifications of the units that have not
been approved by Schaerer, this declaration is rendered invalid.
Documentation specialist
Schaerer AG
Hans-Ulrich Hostettler
P.O. Box
Allmendweg 8
CH-4528 Zuchwil, Switzerland
EMC Directive 2004/108/EC
• EN 55014-1:2006 +A1
• EN 55014-2:1997 +A1 +A2
• EN 61000-3-2:2006 +A1 +A2
• EN 61000-3-3:2008
EMC
• CISPR 14-1 Ed 5.1: 2009
• CISPR 14-2 Ed 1.2: 2008
• IEC 61000-3-2 Ed 3.2: 2009
• IEC 61000-3-2 Ed2.1:2001
• IEC 61000-3-3:2008
Product description
BASCJ_EN
V03 | 07.2015