Programming Of Parameters Of The Machine - Wega Polaris EPU Instruction Manual

P
13. rogramming of parameters of the machine
Turn the programming switch to the ON position (
Keep the MODE key
access to programming.
To scroll through the various areas of the programming menu (see
alongside) use the MODE key
Use the ENTER key
one within the same area.
To modify the value of each parameter, use the increase
decrease keys.
i
The system automatically exits the programming phase after about
20 seconds from the last operation carried out. When programming
is finished, turn the programming switch back on OFF.
i
With the programming switch in the ON position, the selections
are not active.
20
DISPLAY - AVANTGARDE
P
flashes on the display).
pressed for at least 3 seconds to have
.
to move from a parameter to the next
and
1,0 atm 120°C P
09:16 09-02-04 1
clock set-up
09:16 18-02-05 1
auto on/off
on 08:50
auto on/off
off 18:50
working days
1 2 3 4 5 6 7
reg. softener
00000000
boiler pressure
0,0 atm is=0,0
cup heater
80°c
lAnguage
English
dispenser alarm
000 000 000