Luminous Scrolling Messages - Wega Polaris EPU Instruction Manual

L
12.
uminous scrolling messages
12.1 Characteristics
• Possibility to insert a message (maximum 50 characters) with dedicated programmer;
• Possibility to modify speed of text scrolling with dedicated programmer.
12.2 Message programming
• With the machine off, connect the hand-held programmer and then
power on.
• The display will show a flashing cursor on the first digit.
• To insert the character, press the "RIGHT ARROW" key
the key held down, the characters scroll. Release the key when you
reach the desired character.
• To memorize the character, press "ENTER"
• The cursor will now move to the next character.
• Proceed in the same way for the other digits.
• You can insert spaces in the message by pressing
the "SPACE" key
with the "DEL" key .
• When you have finished, press "END"
sage.
• Turn the programmer off and disconnect it. Turn the machine back
on, and the message will start scrolling on the display.
12.3 Programming of parameter for speed of message scrolling
• With the machine off, connect the hand-held programmer. While holding down the "ZERO" key
power on the machine.
• The display will show the message "PROG SPEED".
• Type in a speed value between 1 and 5 (1=slow 5=fast) then press "ENTER"
• The display will show the message "END", meaning that the parameter has been programmed.
• Turn the programmer off and disconnect it. Turn the machine back on.
.
. You can delete an incorrect character
to memorize the mes-
. With
.
DISPLAY - AVANTGARDE
,
19