Making Coffee; Version Epu; Version Evd - Wega Polaris EPU Instruction Manual

M
6.
aking coffee
6.1 EPU version
• put the coffee cup under the dispensing spout.
• Press the desired delivery switch. You will have the delivery which can
be stopped by means of the same switch once the desired amount of
coffee in the cup is obtained.
6.2 EVD version
COFFEE DOSE PROGRAMMING
• Turn the programming switch (B) to the ON position;
STOP
• Hold the key down for 5 seconds: all LED on the push button
PROG.
panel come on;
• Press the dose key to be programmed (e.g. 1 espresso coffee
• Wait for dispensing. To confirm the dose press the dose key
STOP
the key again;
PROG.
• Repeat this operation for the other dose keys;
• Upon conclusion of the programme, press the key
LEDs go off on the push button panel, and turn the programming switch
(B) to OFF.
For models with 2-3-4 groups it is possible to program simultaneously all
machine push button panels using only the right push button panel. It is
however advisable to check the programming of the other push button
panels.
COFFEE DELIVERY
• put the coffee cup under the dispensing spout;
• press the desired dose key (e.g. 1 espresso coffee
for coffee to be delivered
• to stop delivery of coffee in advance, press the delivery key again
STOP
or press the key
PROG.
• in the event of anomalies or if the push button panel is locked, use the
manual delivery switch (A).
(LED comes on);
;
);
or
STOP
until all
PROG.
) and wait
Dispensing
coffee
B
A
EPU - EVD
A
9