Autosteamer - Wega Polaris EPU Instruction Manual

A
9.
utosteamer
9.1 Use
The autosteamer system makes it possible to make the milk foamy and to bring it up to a programmable temperature.
1) Immerge the ends of the autosteamer into the beverage to be heated;
2) Press the autosteamer key;
3) Wait for steam delivery to be completed.
i
To stop delivery ahead of time, press the selected key again.
To keep the steam dispensers in perfect working order, it is advisable to carry out a delivery dry run
i
after each use.
Keep the ends of the autosteamer clean at all times by means of a cloth dampened in lukewarm water.
Use the utmost caution with the autosteamer, as high-temperature steam is present.
9.2 HEATING TEMPERATURE adjustment
To adjust the activation temperature of the autosteamer, proceed as follows:
• Turn the programming switch (1) to the ON position;
• Hold down the key
at least 5 seconds;
• Repeatedly press the key
• Use the keys
STOP
• Keep the key pressed to confirm the operation ;
PROG.
• To exit programming, press the key
tions are made for at least 10 seconds) ;
• Upon completion of programming, turn the programming
i
The system includes a maximum operation time of 4 minutes for the autosteamer.
AUTO
STEAM
Key

autosteamer

of the upper left hand push button panel for
until the display shows the message
to modify the temperature of the autosteamer shown on the display;
STOP
(the machine automatically exits programming if no selec-
PROG.
autosteamer
65°C
(1) back to OFF
switch .
DISPLAY - AVANTGARDE
1
17