Selection Count; Cup Heater - Wega Polaris EPU Instruction Manual

9.3 MILK FOAMING adjustment
To adjust milk foaming with the autosteamer, proceed as
follows:
• Use a wrench to unscrew component
nozzle;
• Use a screwdriver on the screw
- to reduce foaming turn clockwise
- to increase foaming turn counter-clockwise
S
10. election count
To view the sum of work performed by the machine, proceed as follows:
1) Turn the programming switch to the OFF position;
STOP
2) Keep the key
PROG.
the display shows the total number of selections carried out;
3) By pressing the keys on the coffee selection push button panel or on the selections push
button panel, it is possible to view the number of selections made with that key;
4) Press twice the key
i
To reset the counts see chap 14 - "Data resetting"
C
11.
up heater (if it is present)
To activate or deactivate the cup heater, turn the cup heater switch
switch to ON .
18
DISPLAY - AVANTGARDE
(A) of the steam
(B) located inside the part:
of the left push button panel pressed for at least 5 seconds until
STOP
to exit counts .
PROG.
A
total coffees
000000
counters
000000
placed above the turn on machine
B