Carel pCO Manual page 35

¦ 0000
¦
+--------------------+
This mask allows you to set a second SERVICE password to be used instead of the
MANUFACTURER password.
CONF_MACCHINA7
+--------------------+
¦Insertion
¦default values
¦Press UP/DOWN keys
¦N
+--------------------+
This mask allows you to automatically set factory-set parameters so as to make the installation
procedure very fast and easy. Each parameter has been given a specific value on the basis of the
most common applications requirements in this field but - should it be inadequate - modify it by
simply entering the dedicated mask.
Ver. 1.0 dated 21/10/94
¦
¦
AL¦
¦
¦
¦
35