+--------------------+
¦Manual procedure
¦Comp. 1: AUTOMATIC
¦Comp. 2: AUTOMATIC
¦Comp. 3: AUTOMATIC
+--------------------+
Should your system require maintenance, you can use the manual function to check the status of
each single device connected to pCO (compressors and fans). In this way you can directly operate
any device ignoring their previously set time-delays . In the event of off-normal conditions during
the manual stage, the relative alarms will be automatically displayed.
Ver. 1.0 dated 21/10/94
+--------------------+
AL¦
¦Manual procedure
¦
¦Vent. 1: AUTOMATIC
¦
¦Vent. 2: AUTOMATIC
¦
¦Vent. 3: AUTOMATIC
+--------------------+
AL¦
¦
¦
¦
27