Sony PCM-D10 Help Manual page 78

Help Guide
Linear PCM Recorder
PCM-D10
Specifying a segment of a file to play repeatedly (A-B repeat)
You can specify the starting point A and the finishing point B in a file to play the segment between the specified points
repeatedly.
While playback is on standby or in progress, press
1
[Set End of A-B Repeat] appears on the display window.
Press A-B again to specify the finishing point B.
2
[Exit A-B Repeat] appears and the specified segment plays repeatedly.
Note
While playback is on standby, you cannot specify the same point as the starting point A and the finishing point B. Specifying the finishing
point B cancels the specified starting point A.
You cannot turn on the button-hold repeat playback function while the A-B repeat playback function is active.
Hint
To cancel the A-B repeat playback function and resume the normal playback, press
To change the segment specified for the A-B repeat playback function, resume the normal playback and then repeat steps 1 and 2 once
again.
Related Topic
Selecting the playback mode
Repeatedly playing the current file (Button-hold repeat playback)
A-B to specify the starting point A.
4-744-529-11(2) Copyright 2018 Sony Corporation
78
A-B again.