Help Guide
Linear PCM Recorder
PCM-D10
Turning the power on
Slide the POWER switch to [ON].
1
Hint
The Auto Standby function on your linear PCM recorder is set to [30min] by default to save battery power. If you leave the linear PCM
recorder unused for 30 minutes, it will go into low power consumption mode.
If you turn the power back on within 4 hours from your last power-off, the power will come on quickly.
Related Topic
Turning the power off
Setting the time period before the linear PCM recorder goes into low power consumption mode (Auto Standby)
4-744-529-11(2) Copyright 2018 Sony Corporation
34