Sony PCM-D10 Help Manual page 121

Help Guide
Linear PCM Recorder
PCM-D10
Dividing a file at the current playback point
You can divide a single file into two files. Dividing a file helps you quickly locate the point from which you want to play in a long
recording file, such as a meeting recording. You can further divide either of the divided files.
Select the file that you want to divide, and then play the file and stop at a point where you want to divide the file.
1
Select [Divide] - [Current Position] from the OPTION menu, and then press
2
On the preview screen, make sure that the dividing point is where you wanted, and then press
3
[Divide at Current Stop Position?] appears on the display window.
Press or to select [Yes], and then press
4
[Please Wait] appears, and the divided files will be suffixed with a sequential number ([_01] for the first part, and [_02] for
the second part).
A. Before dividing a file:
B. After dividing a file: A suffix made up of a sequential number ([_01] for the first part, and [_02] for the second part) is
added to the file name of the divided files.
Note
While playback of a file is in progress, you cannot divide the file.
You cannot divide a protected file. To divide a protected file, remove the protection from the file first, then divide the file. For instructions
on removing protection, see
You cannot divide a file if:
The file is recorded by a device other than the linear PCM recorder.
An attempt to divide the file is made at a point within 0.5 seconds from the beginning or the end of the file.
The total number of recorded files reaches the maximum number of recordable files. ([File Full] appears on the display window.)
indicates where you divided the file.
Protecting a file.
.
121
.
.