Sony PCM-D10 Help Manual page 165

Signal-to-noise ratio (S/N)(*7)
(Input from the LINE IN jack, output from LINE OUT
jack when recording/playing back)
Total harmonic distortion(*8)
(Input from the LINE IN jack, output from LINE OUT
jack when recording/playing back)
Maximum sound pressure (built-in microphones)
Intrinsic noise (built-in microphones)
Bluetooth
File extension: .wma
AAC-LC (*3) (*6)
Bit rate: 16 kbps - 320 kbps (Supports variable bit rate (VBR))
Sampling frequencies: 11.025/12/16/22.05/24/32/44.1/48 kHz
File extension: .m4a
LPCM (*3)
Quantization bit rate: 24 bit
Sampling frequencies: 192/176.4/96/88.2/48/44.1 kHz
File extension: .wav
LPCM (*3)
Quantization bit rate: 16 bit
Sampling frequencies: 192/176.4/96/88.2/48/44.1/22.05 kHz
File extension: .wav
FLAC (*3)
Quantization bit rate: 24 bit
Sampling frequencies: 192/176.4/96/88.2/48/44.1 kHz
File extension: .flac
FLAC (*3)
Quantization bit rate: 16 bit
Sampling frequencies: 192/176.4/96/88.2/48/44.1/22.05 kHz
File extension: .flac
When the High S/N Mode function is turned off:
98 dB or above (1 kHz, IHF-A, load impedance: 22 kΩ)
When the High S/N Mode function is turned on:
100 dB or above (1 kHz, IHF-A, load impedance: 22 kΩ)
0.009% or below (1 kHz, 20 kHz LPF, load impedance: 22 kΩ)
123 dBSPL
22 dBSPL(A) Typ
Communication method: Bluetooth Standard version 4.0
165