Sony PCM-D10 Help Manual page 123

Help Guide
Linear PCM Recorder
PCM-D10
Dividing a file at all the track mark points
You can divide a file at all the track mark points.
Select the file that you want to divide.
1
While playback is on standby, select [Divide] - [At All Track Marks] from the OPTION menu, and then press
2
[Divide at All Track Marks?] appears on the display window.
Press or to select [Yes], and then press
3
[Please Wait] appears and the file will be divided at all the track mark points, deleting all the track marks. The divided files
will be suffixed with a sequential number ([_01], [_02], and so on).
A. Before dividing a file:
B. After erasing track marks: A file is divided at all the track mark points, and the divided files will be suffixed with a
sequential number ([_01], [_02], and so on).
Note
While playback of a file is in progress, you cannot divide the file.
You cannot divide a protected file. To divide a protected file, remove the protection from the file first, then divide the file. For instructions
on removing protection, see
You cannot divide a file if:
The file is recorded by a device other than the linear PCM recorder.
There is a track mark within 0.5 seconds from the dividing position.
The total number of recorded files reaches the maximum number of recordable files. ([File Full] appears on the display window.)
The new file name exceeds the maximum number of characters.
The file name after division is identical to an existing file in the folder.
BWF files have the same time stamp information as the source file.
Hint
To cancel the dividing process, select [No] in step 3, and then press
indicates a track mark point.
Protecting a file.
.
.
123
.