Sony PCM-D10 Help Manual page 64

Help Guide
Linear PCM Recorder
PCM-D10
Turning down the microphone volume at once (Microphone attenuation)
If the input level of the built-in microphones or external microphone is high, slide the MIC ATT switch to [20]. This attenuates the
input level by approximately 20 dB.
When an external microphone is connected, slide the INPUT switch in accordance with the microphone.
1
When the microphone is connected to the MIC IN/LINE IN jack, slide the switch to [MIC/LINE]. When the microphone is
connected to the XLR/TRS jack, slide it to [XLR/TRS].
Slide the MIC/LINE INPUT LEVEL or XLR/TRS INPUT LEVEL switch to [MIC].
2
Slide the MIC ATT switch to [20].
3
Related Topic
Recording with the external microphone connected to the MIC IN/LINE IN jack
Recording with the external microphone connected to the XLR/TRS jack(s)
4-744-529-11(2) Copyright 2018 Sony Corporation
64