Getting Started; Main Steps For Initial System Setup - Risco ProSYS Plus Quick Installer's Manual

Getting Started

This guide covers the main tasks required to install and set up the ProSYS Plus
system. Installation and setup should be performed by a professional alarm system
installer. For additional comprehensive details, refer to the ProSYS Plus Installation
and Programming Manual.

Main Steps for Initial System Setup

INSTALLATION
Step 1: Creating a Plan for Mounting the System
Step 2: Wiring, Settings, and Module Installations at the Main Panel
Step 3: Bus Line Installations
Step 4: Connecting Relay Detectors
Step 5: Connecting the Backup Battery and Mounting the Main Panel
SYSTEM INITIALIZATION, DEVICE ALLOCATIONS & GENERAL SYSTEM
CONFIGURATION
Step 1: Working with the Keypad and Installer Menus
Step 2: Powering-Up and Initializing the System
Step 3: Allocating and Configuring Installed Components
Step 4: Allocating Wireless Zones
Step 5: Basic Zone Configuration for All Zone Types
Step 6: Advanced Zone Configuration for Bus Zones and Wireless Zones
Step 7: Configuring System Communication
Step 8: Configuring Cloud Connectivity
Step 9: Configuring Common System Parameters
INSTALLER PROGRAMMING
Step 1: Defining Additional Parameters in the Installer Programming Menu
Step 2: Exiting Installer Programming Menu after Initial System Configuration
Step 3: Defining Parameters in other Installer Menus
TESTING THE SYSTEM
INSTALLER RESPONSIBILITIES FOR ASSISTING THE CLIENT
09/2016 Page 6 5IN2371 C