R&S SGS100A Getting Started page 35

®
R&S SGS100A
The [POWER ON/STANDBY] and [LAN] key have to be green.
2. On the connected remote PC, start the R&S SGMA-GUI software application.
The main panel of the application opens. The panel provides a quick access
to the main settings of the configured and activated instruments. The display
shows one row per instrument with the instrument-specific settings. The rows
comprise the instrument, the connection state, the used frequency and power
level, the state of the RF output and the modulator and the used reference fre-
quency source.
3. In the R&S SGMA-GUI main panel, the green indicator in front of the instru-
ment's name confirms that there is a connection between the instrument and
the remote PC and that the instrument is recognized by the software.
4. In the R&S SGMA-GUI main panel, select the row corresponding to the instru-
ment to be configured and select "Instrument Name > Preset" to restore the
predefined instrument's settings.
5. In the R&S SGMA-GUI main panel, select the row corresponding to the instru-
ment to be configured and adjust the "Frequency" as required.
Getting Started 1416.0570.02 ─ 11
Configuring a CW Signal with the R&S SGMA-GUI
First Steps with the Instrument
33