R&S SGS100A Getting Started page 32

®
R&S SGS100A
[RF OUT]
Provides an RF 50 Ohm signal output.
NOTICE! Maximum input levels. Do not overload the RF output. The maximum
permissible back-feed is specified in the data sheet.
[I , Q]
SMA female type connectors that are inputs of the I/Q modulator, provided for
feeding of external signal.
NOTICE! Maximum input levels. Do not overload the I and Q inputs. The maxi-
mum permissible voltage is 1V. For details, refer to the data sheet.
Note: The I/Q modulator requires one of the hardware options R&S SGS-B106V/-
B112V.
[REF / LO IN, REF / LO OUT]
SMA female type connectors, for reference or local oscillator signals, and alterna-
tively also in MIMO setups.
Reference input and output:
● [REF IN]: Input for external reference signal.
● [REF OUT]: Output of internal reference signal.
Local oscillator input and output:
● [LO IN]: Input for external LO signals
● [LO OUT]: Output of internal LO signals.
Note: The local oscillator input/output requires the additional software option
R&S SGS-K90.
Getting Started 1416.0570.02 ─ 11
Instrument Tour
Rear Panel Tour
30