R&S SGS100A Getting Started page 31

®
R&S SGS100A
[PCI Express Connector]
The PCIe (Peripheral Component Interconnect Express) single lane interface
allows remote control with optimized speed.
For details, see Chapter 2.3.3, "Connecting a Controller via PCI
on page 23.
[USB Connector]
The USB (universal serial bus) interface, type micro, allows you to connect vari-
ous external devices, e.g.:
● If the interface is configured as a device interface, the R&S SGS can be con-
nected to other devices like a remote computer. On the computer, you can
perform a firmware update, manual operation via the R&S SGMA-GUI soft-
ware or for remote control of the instrument.
● If the interface is configured as a host interface, a memory stick for file trans-
mission can be connected.
For details, see Chapter 2.3.4, "Connecting a Controller or a USB Device via
USB", on page 23.
[LAN Connector]
The [LAN] (Ethernet) interface allows you to connect the R&S SGS to other devi-
ces like a remote computer. On the computer, you can perform a firmware
update, manual operation via the R&S SGMA-GUI software or for remote control
of the instrument. The connection to the remote computer can be direct or via a
network.
For details, see Chapter 2.3.2, "Connecting a Remote PC via
Getting Started 1416.0570.02 ─ 11
Instrument Tour
Rear Panel Tour
Express",
LAN", on page 19.
29