Overview - Sony XDCAM PDW-510 Operation Manual

4-1 Overview

Clip lists and sub clips
Scene selection is a function which allows you to save,
load, and edit clip lists consisting of clips recorded on disc,
or parts of clips, arranged in any order. Clips or parts of
clips which have been inserted into clip lists are called sub
clips.
Clips recorded on disc
Clip 1 Clip 2
Clip list example
Clip 2 Part of clip 4 Part of clip
Sub clip 1 Sub clip 2
Clip lists on disc and the current clip list
Up to 99 clip lists can be saved on disc. These clip lists can
be loaded, one at a time, into the camcorder's memory for
playback and editing. Newly created clip lists are also
saved in the camcorder's memory.
This manual refers to the clip list which is currently loaded
into the camcorder's memory as the "current clip list".
66
4-1 Overview
Scene Selection
Clip 3 Clip 4
m
3
Sub clip 3
Chapter
Camcorder's memory
Current clip list
Can be edited (adding and
deleting, rearranging sub
clips)
SAVE m M LOAD
Disc
E0001 (Clip list 1)
E0002 (Clip list 2)
E0003 (Clip list 3)
:
:
E0099 (Clip list 99)
The current clip list is always the target of sub clip creation
and editing.
Notes
• Data in the camcorder's memory is lost when the
camcorder is powered off or the disc is ejected. After
creating or editing a clip list, be sure to save it to disc.
• The current clip list cannot be saved to disc when the
disc's write-protect tab is set to the recording disabled
position.
4
cClip list playback
and thumbnail
display