Sony XDCAM PDW-510 Operation Manual page 182

No. Page
04 GAMMA
05 BLK GAMMA
06 KNEE
07 DETAIL 1
182
Menu List
Item Settings
GAMMA OFF/ON
STEP GAMMA 0.35 to 0.90
MASTER GAMMA (–99 to +99)
R GAMMA (–99 to +99)
G GAMMA (–99 to +99)
B GAMMA (–99 to +99)
TEST OUT SELECT ENC/R/G/B
GAMMA SELECT STD/FILM
GAMMA SEL (STD) 1 to 6
GAMMA SEL (FILM) 1 to 5
BLACK GAMMA OFF/ON
BLK GAMMA RANGE LOW/L.MID/
H.MID/HIGH
MASTER BLK (–99 to +99)
GAMMA
R BLACK GAMMA (–99 to +99)
G BLACK GAMMA (–99 to +99)
B BLACK GAMMA (–99 to +99)
TEST OUT SELECT ENC/R/G/B
KNEE OFF/ON
KNEE POINT 50 to 109%
KNEE SLOPE (–99 to +99)
KNEE SATURATION OFF/ON
KNEE SAT LEVEL (–99 to +99)
WHITE CLIP OFF/ON
WHITE CLIP LEVEL 100.0 to 109.5% 109.0
DETAIL OFF/ON
APERTURE OFF/ON
DETAIL LEVEL (–99 to +99)
APERTURE LVL (–99 to +99)
DTL H/V RATIO (–99 to +99)
CRISPENING (–99 to +99)
LEVEL DEPEND OFF/ON
LV. DEPEND LVL (–99 to +99)
DETAIL FREQ. (–99 to +99)
Default Description
ON Turns the gamma correction function on or
off.
0.45 Sets the master gamma correction curve in
steps.
0 Sets the master gamma correction curve.
0 Sets the R gamma correction curve.
0 Sets the G gamma correction curve.
0 Sets the B gamma correction curve.
ENC Selects the output signal of TEST OUT
connector.
STD Selects the gamma table.
3 Selects the gamma table of STD.
1 Selects the gamma table of FILM.
OFF Turns the black gamma correction on or off.
HIGH Sets the range affected by black gamma.
0 Adjusts the master black gamma.
0 Sets the correction curve of the R black
gamma.
0 Sets the correction curve of the G black
gamma.
0 Sets the correction curve of the B black
gamma.
ENC Selects the output signal of TEST OUT
connector.
ON Turns the knee correction circuit on or off.
85.0 Sets the knee point level.
0 Set the knee slope level.
ON Turns the knee saturation function on or off.
0 Sets the knee saturation level.
ON Turns the white clipping function on or off.
Adjusts the white clipping level.
ON Sets the detail correction function on or off.
ON Turns the aperture correction function on or
off.
0 Sets the general level of the detail signal.
0 Sets the aperture level.
0 Sets the level of the V detail signal.
0 Sets the crispening level.
ON Turns the level depend function on or off.
0 Sets the level of the level depend.
0 Sets the frequency of the H detail signal.