Sony XDCAM PDW-510 Operation Manual page 187

Professional disc camcorder
Hide thumbs Also See for XDCAM PDW-510:
Table of Contents

Advertisement

No.
Page
Item
04
BATTERY
BEFORE END 1
END 1
BEFORE END 2
END 2
BEFORE END 3
END3
05
AUDIO-1
CA-701 AUDIO IN
AUDIO CH3/4
MODE
REAR XLR AUTO
FRONT MIC REF
REAR MIC REF
MIN ALARM VOL
SP ATT LEVEL
HEADPHONE OUT
Settings
Default
5/10 to 95/100%
5%
0/1/2/3/4/5%
0%
11.5 to 17.0V
11.5
(in 0.1V steps)
11.0 to 11.5 V
11.0
(in 0.1V steps)
11.5 to 17.0V
11.8
(in 0.1V steps)
11.0 to 11.5 V
11.0
(in 0.1V steps)
ENABL/DSABL
ENABL
CH1/2/SW
SW
OFF/ON
OFF
–60 dB/–50 dB/
–60 dB
–40 dB
–60 dB/–50 dB/
–60 dB
–40 dB
OFF/SET
OFF
OFF/3/6/9 dB
OFF
STREO/MONO
MONO
Description
Used when a BP-GL65/GL95/M100 Battery
Pack is used. Sets the voltage warning level
just before the battery ends.
Used when a BP-GL65/GL95/M100 Battery
Pack is used. Sets the voltage level at which
the battery ends and the camcorder stops
operation, just before the battery ends.
Used when a BP-L60S Battery Pack is used.
Sets the voltage warning level just before the
battery ends.
Used when a BP-L60S Battery Pack is used.
Sets the voltage level at which the battery
ends and the camcorder stops operation, just
before the battery ends.
Used when a battery pack other than a BP-
GL65/GL95/L60S/M100 or an external power
connected to the DC IN connector is used.
Sets the voltage warning level just before the
battery ends.
Used when a battery pack other than a BP-
GL65/GL95/L60S/M100 or an external power
connected to the DC IN connector is used.
Sets the voltage level at which the battery
ends and the camcorder stops operation, just
before the battery ends.
When a CA-701 camera adaptor is
connected, selects whether or not to enable
input of audio channels 3 and 4 from the
camera adaptor.
ENABL: Camera adaptor can be used.
DSABL: Camera adaptor cannot be used.
Selects the sources to be recorded to
channels CH-3/4.
CH1/2: Same sources as CH-1/2.
SW: Signals selected by the AUDIO IN CH-3/
CH-4 switches.
Turns the XLR connection automatic
detection on or off .
Sets the reference level of the front
microphone.
Sets the reference level when the AUDIO IN
CH1 connector is set to MIC.
Volume of the monitor speaker alarm tone
when it is turned all the way down.
OFF: Almost inaudible.
SET: Faintly audible.
Lowers the volume of the monitor speaker.
Has no effect on earphone volume.
Selects whether to make the rear earphone
monaural or stereo.
187
Menu List

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pdw-510wXdcam pdw-530Xdcam pdw-530pXdcam pdw-510p

Table of Contents