Rdl-3000-Rme; Rdl-3000-Rme Frequency Bands; Rdl-3000-Rme Antenna Use And Transmit Power; Rdl-3000-Rme Certified Antennas - Redline RDL-3000 Series Product Manual

RDL-3000 M2M Solutions

4.2 RDL-3000-RME

4.2.1 RDL-3000-RME Frequency Bands

Operation of the final product (containing the RDL-3000-RME module) requires a
software 'key' that is available exclusively from Redline. This key restricts device
operation to the IC 2305-2320 MHz and 2345-2360 MHz bands and is subject to
licensing. The professional installer and operator can not modify or otherwise circumvent
these operational restrictions.

4.2.2 RDL-3000-RME Antenna Use and Transmit Power

The RDL-3000-RME module supports operation with 2x2 MIMO antenna systems with
two transmit chains and two receive chains. The RDL-3000-RME module must be used
only with certified antennas and using the channel size and output power level specified
by the IC regulations.

4.2.3 RDL-3000-RME Certified Antennas

The RDL-3000-RME module has been designed to operate with the antennas listed in
the following table.

Table 65: RDL-3000-RME: Approved Antennas

Manufacturer
Redline
Redline
Redline
Redline
70-00184-03-02
Part #
30-00328-30
AFS-DBG-02120-01
AFS-DBG-0290-01
AFS-DBG-0260-01
Proprietary Redline Communications © 2013
Gain Beamwidth
(dBi) (degrees)
14.5 35
15 120
16 90
17 60
Page 31 of 50
Frequency
Range
(MHz)
2300 - 2700
2300-2700
2300-2700
2300-2700
April 30, 2013