Fcc Recommendations To Unii Band Users; Table 77: Fcc: Rdl-3000-Rmc Tdwr System Locations - Redline RDL-3000 Series Product Manual

RDL-3000-RMC/E/F
(2) This device must accept any interference received, including interference that
may cause undesired operation.
FCC Information to Users @ FCC 15.21:
5.
Warning:
Communications could void the user's authority to operate the equipment.
FCC Recommendations to
Redline, in complete cooperation with the FCC, instructs professional installers and
operators of this equipment in the UNII band to follow these guidelines.
Review Table 3: Notice - FCC - TDWR System Locations to determine if the intended
deployment location is near a TDWR site.
Operation in the TDWR band of 5600-5650 MHz is not permitted. The equipment
1.
does not allow the operator to use Web, CLI, or SNMP to set a frequency that
overlaps this range.
Operation in the 5570-5680 MHz band (excluding 5600-5650 MHz) is permitted
2.
beyond 35 km (22 mi) AND not in line-of-sight of a TDWR site.
Operation in the 5570-5680 MHz band (excluding 5600-5650 MHz) within 35 km (22
3.
mi) OR in line-of-sight of a TDWR site is allowed by observing a 30 MHz upper and
lower guard band on the operational frequency of the nearby TWDR station.
For example, if the nearby TDWR is Miami (5605 MHz), the base station frequency
setting must exclude channels with center frequencies from 5575 MHz (30 MHz
below 5605) to 5635 MHz (30 MHz above 5605).
It is recommended that the operator register in the voluntary WISPA sponsored
database. Go to the www.wispa.org website and click on TDWR to view more
information and register in the online database.
Frequency selection is regulated by a regional code integrated into each options key.
This feature enforces compliance to regional regulatory statutes. Each options key is
keyed to the unique MAC address of an RDL-3000 radio platform. Options keys can be
generated only by Redline and its authorized agents. End-users can not generate or
modify options keys (to obtain or alter regional codes).
Redline provides technical training programs and information covering network design
and installation for Redline distributors, value added resellers, installers, and other
partners. This program is intended in part to train participants to a level of understanding
where they are competent to order, setup and configure the Redline wireless equipment
to be in compliance with regulatory requirements in the region where this equipment is
installed. Redline sales order processing is also trained to verify that regional codes are
consistent with the intended deployment location as documented in the sales order.
STATE
AZ
CO
FL FT LAUDERDALE
FL
FL ORLANDO
70-00184-03-02
PRODUCT MANUAL
Changes or modifications

Table 77: FCC: RDL-3000-RMC TDWR System Locations

CITY LONGITUDE
PHOENIX W 112 09 46
DENVER W 104 31 35
W 080 20 39
MIAMI W 080 29 28
W 081 19 33
Proprietary Redline Communications © 2013
not expressly
UNII band
Users
LATITUDE FREQUENCY
N 33 25 14
N 39 43 39
N 26 08 36
N 25 45 27
N 28 20 37
approved by
TERRAIN
ELEVATION
(MSL) [ft]
5610 MHz 1024
5615 MHz 5643
5645 MHz 7
5605 MHz 10
5640 MHz 72
Page 42 of 50
Redline
ANTENNA
HEIGHT
ABOVE
TERRAIN
[ft]
64
64
113
113
97
April 30, 2013