Rdl-3000-Rmf; Rdl-3000-Rmf Frequency Bands; Rdl-3000-Rmf Antenna Use And Transmit Power; Rdl-3000-Rmf Certified Antennas - Redline RDL-3000 Series Product Manual

RDL-3000-RMC/E/F

4.3 RDL-3000-RMF

4.3.1 RDL-3000-RMF Frequency Bands

Operation of the final product (containing the RDL-3000-RMF module) requires a
software 'key' that is available exclusively from Redline. This key restricts device
operation to the FCC 473 - 695 MHz band on TV channels 14 - 35 and 39 - 51. The
professional installer and operator can not modify or otherwise circumvent these
operational restrictions.
To operate in the TV Whitespaces frequency range, each RDL-3000-RMF must contact
and register with the WSDB database server (server URL is programmed into the RDL-
3000-RMF). The RDL-3000 may only transmit on channels indicated as 'available' by the
WSDB database. Channel assignments are temporary and the RDL-3000-RMF must
periodically contact the WSDB to refresh the channel list. The RDL-3000-RMF vacates a
channel in-use immediately when a WSDB database status update indicates the channel
is no longer available or the expiry time for an obtained list has elapsed.
The RDL-3000-RMF operating as a PMP Sector Controller/PTP Master (PMP-SC) is not
allowed to transmit on any channel before registering with the WSDB database and
obtaining a list of available channels for its location. The RDL-3000-RMF operating as a
PMP Subscriber/PTP Slave (PMP-SS) is allowed to transmit on the channel currently
being used by the PMP-SC initially only for the purpose of registering with the WSDB
database and obtaining a list of available channels for its location. If the channel in-use
is not available, the PMP-SS notifies the PMP-SC and stops transmitting. The PMP-SS
may register and obtain the current channel list once per hour.

4.3.2 RDL-3000-RMF Antenna Use and Transmit Power

The RDL-3000-RMF module supports operation with 2x2 MIMO antenna systems with
two transmit chains and two receive chains. The RDL-3000-RMF module must be used
only with certified antennas and using the channel size and output power level specified
by the FCC regulations.

4.3.3 RDL-3000-RMF Certified Antennas

This device has been designed to operate with the antennas listed in the following table.
Any additional antennas will be used only after authorization is obtained through Class II
permissive change.
Supplier
Redline
Redline
70-00184-03-02
PRODUCT MANUAL

Table 74: RDL-3000-RMF: Transmit Power

Channel #
14-34
40-51
35, 39

Table 75: RDL-3000-RMF: Approved Antennas

Gain
Part #
Range (MHz)
(dBi)
AFS-VH-
13
60060-01
AFS-SB-
11
60055-01
Proprietary Redline Communications © 2013
Tx Power (dBm)
Frequency
Application
470-698 Sector
Log-P
470-698
Directional
+18
+16
Beamwidth /
Size
Polarity
122 cm 60 deg
(48 in) vpol & hpol
122 cm 55 deg
(48 in) vpol & hpol
Page 40 of 50 April 30, 2013