Remote Probe Model; Figure 14 Fixed Probe Model - Vaisala HMT140 User Manual

HMT140 User Guide
4. Tighten the locking bushing to the M8 panel connector by turning it clockwise.
Figure 14 Fixed Probe Model
1 Holder bushing (attached permanently to the probe)
2 HMP110 probe
3 Locking bushing
5.2.2 Remote Probe Model
To remove and replace a remote probe:
1. Unscrew the small sleeve at the end of the probe cable that secures the probe in place,
and pull out the probe.
46
M211488EN-G