Optional Mounting Accessories; Probe Mounting Flange; Probe Mounting Clamp; Figure 12 Optional Probe Mounting Flange - Vaisala HMT140 User Manual

HMT140 User Guide
3.2 Optional Mounting Accessories
3.2.1 Probe Mounting Flange
The probe mounting flange (Vaisala order code: 226061) is a general purpose mounting flange
for 12 mm (0.5 in) diameter probes. It can be used to hold the HMP110 probe in a through-wall
installation.
The silicone plug that is delivered with the flange is not suitable for use with the
probe cable of the HMT140.
Figure 12 Optional Probe Mounting Flange
3.2.2 Probe Mounting Clamp
The optional mounting clamp (Vaisala order code: 226067) makes it easy to install the probe
on the wall of the measurement environment. The probe can be detached for calibration
simply by loosening the lower screw.
Installing the entire probe in the measurement environment prevents heat conduction to the
sensor, and is the recommended installation method.
Figure 13 Optional Probe Mounting Clamp
24
M211488EN-G