Calibration And Adjustment; Figure 15 Remote Probe Model - Vaisala HMT140 User Manual

2. Replace the probe and screw the small sleeve back on, securing the probe tightly in place.
Figure 15 Remote Probe Model
1 Probe cable
2 Sleeve securing the probe to the cable
3 HMP110 probe
5.3 Calibration and Adjustment
HMP110 probe calibration status can be viewed with the HMT140 Utility. Calibration settings are
adjusted using viewLinc.
To view probe calibration status:
1. On the Info tab, click Get. This page will display calibration information including
calibration date, calibrator, and next calibration due date.
Please refer to the Vaisala viewLinc User Guide for further information, or visit
www.vaisala.com/viewlinc.
For calibration of HMP110 probes, refer to the supporting documentation available on the
Vaisala website.
Chapter 5 – Maintenance
47