Vaisala HMT140 User Manual page 29

7. Click Retrieve again to force retrieval of current settings. The connected type is identified
in the upper right corner of the Setup tab window.
The status bar is located at the bottom of the HMT140 Utility window. It contains the
following panels:
• Left panel: Displays the Configuration Cable status: Found USB Programmer or
Looking for USB Programmer.
• Middle panel: Displays progress messages of the different actions: Update, Retrieve,
Status, and Info.
• Right panel: Displays a message when the parameters on the Setup page have been
modified and require saving.
8. If the IP address is static, uncheck the IP Address Dynamically Assigned option and enter
the network parameters. Otherwise leave this option checked.
For additional IP address settings information see,
Chapter 4 – Set Up and Operation
Check Transmission Status (page 31).
27