Valeport Hyperion Operating Manual page 16

0901814c - Hyperion Fluorometer
Check that data is being received (field 4) see Data Output Format
Now check the following:
The LEDs are on and light is being emitted from the fibres.
The magnitude of the data received increases when the supplied fluorescent target is held at 45° to
the sensor window:
By altering the angle of the target the magnitude of the reading should change thereby showing the
correct operation of the sensor.
If the test target is missing then a piece of good quality white paper can be used.
© 2018 Valeport Ltd
Page 16