Status; System Status - IP-COM AP345 User Manual

Wireless Access Point
User Guide
4.1

System status

This page displays the system status and LAN port status of the AP. To access the page, click
Status > System Status.
Parameter description
Parameter
Device Name
Uptime
System Time
Firmware Version
Description
It specifies the name of the AP. You can change the AP's name on
Network Settings > LAN Setup page.
It specifies the time that has elapsed since the AP starts up this time.
It specifies the current system time of the AP.
It specifies the current firmware version number of the AP. If you have
upgraded the firmware version of the AP, view the current firmware
version here to check whether the upgrade is successful.
4

Status

16