Remote Commander (Dcr-Sr60/Sr80) - Sony HANDYCAM DCR-SR40 Handbook

Remote Commander (DCR-SR60/SR80)

Remove the insulation sheet before using the
Remote Commander.
Insulation sheet
1 DATA CODE (p.61)
Displays the date and time or camera setting
data of the recorded images (p.61) when you
press this while playing back.
2 PHOTO (p.29, 32)
The on-screen image when you press this
button will be recorded as a still image.
3 SCAN/SLOW (p.31, 33)
4 . > (Previous/Next) (p.31, 33)
5 PLAY (p.31, 33)
6 STOP (p.31, 33)
7 DISPLAY (p.24)
8 Transmitter
9 START/STOP (p.28, 32)
q; Power zoom (p.35, 36)
qa PAUSE (p.31, 33)
qs VISUAL INDEX (p.30, 33)
Displays a VISUAL INDEX screen when you
press this while playing back.
qd b / B / v / V / ENTER
When you press any button, the orange frame
appears on the LCD screen. Select a desired
button or an item with b / B / v / V, then press
ENTER to enter.
• Point the Remote Commander towards the remote
sensor to operate your camcorder (p.37).
• When no commands have been sent from the
Remote Commander in a certain period, the
orange frame disappears. When you press any of
b / B / v / V, or ENTER again, the frame appears
at the position where it was displayed last.
• To change the battery, see page 123.
41