Lcd Screen - Sony HANDYCAM DCR-SR40 Handbook

The battery pack is quickly discharged.
• The temperature of the environment is too high or low. This is not a malfunction.
• The battery pack has not been charged enough. Fully charge the battery again. If the problem
persists, replace the battery pack with a new one (p.17).
A problem occurs when the camcorder is connected to the AC Adaptor.
• Turn off the power, and remove the AC Adaptor from the wall outlet. Then, connect it again.

LCD screen

An unknown image appears on the screen.
• The camcorder is in [DEMO MODE] (p.58). Touch the LCD screen.
An unknown indicator appears on the screen.
• They may be warning indicators or messages (p.113).
The image remains on the LCD screen.
• This occurs if you remove the AC Adaptor from the wall outlet or remove the battery pack
without turning off the power first. This is not a malfunction.
You cannot turn the LCD backlight off.
• During Easy Handycam operation (p.27), you cannot turn the LCD backlight on/off pressing
and holding DISP/BATT INFO. Cancel Easy Handycam operation (p.29).
The buttons do not appear on the touch panel.
• Touch the LCD screen lightly.
• Press DISP/BATT INFO on your camcorder (or DISPLAY on the Remote Commander (DCR-
SR60/SR80)) (p.24, 41).
The buttons on the touch panel do not work correctly or do not work at all.
• Adjust the screen ([CALIBRATION]) (p.122).
• If you change the aspect ratio of the image, the aspect ratio of the buttons on the touch panel
and indicators will be switched to the selected one (p.26).
103