Loading And Unloading Operation - Promeba PC-678 User Manual

USER MANUAL //
Review 12/18
03
OPERATING
03.3

Loading and unloading operation

LOADING
· Open the loading ramp of the bench/rail (A)
· Place the stretcher head-on in relation to the loading axle of the bench (A)
· Approach the stretcher until the front wheels have contact with the loading ramp (B)
· Operate the right lever (RED) to unlock the front wheels (C)
· Decisively push to slide the stretcher into the ambulance (D)
· As the rear leg approaches, press the left lever (GREEN) to release the legs (E)
· Keep pushing until the stretcher is fully loaded (E)
· Pay attention to the third anchor point, you may heard a CLICK (in case of being installed)
· Close the loading ramp
UNLOADING
· Open the loading ramp of the bench/rail
· Release the stretcher's closure by operating the lever (in case of being installed)
· Pull the stretcher. It will slide outward, hold it with the hands
· Fold the loading ramp
A
C
E
14
STRETCHER PC-678
B
D
F