Playing Back A Tape - Sony Handycam Vision DCR-TRV9 Operating Instructions Manual

Playing back a tape

You can monitor the playback picture on the LCD screen or in the viewfinder.
(1) Insert the recorded tape with the window facing out.
(2) Slide OPEN in the direction of the arrow and open the LCD panel.
(3) While pressing the small green button on the POWER switch, set it to VTR.
(4) Press 0 to rewind the tape.
(5) Press · to start playback.
(6) Adjust the volume using VOL +/– and the brightness of the LCD screen using LCD
BRIGHT +/–.
You can also monitor the picture on a TV screen, after connecting the camcorder to a TV or
VCR.
LCD BRIGHT
VOL
To stop playback, press π.
To rewind the tape, press 0
To fast-forward the tape rapidly, press )
Using the Remote Commander
You can control playback using the supplied Remote Commander. Before using the Remote
Commander, insert the R6 (size AA) batteries .
To display the LCD screen/viewfinder screen indicators
Press DISPLAY.
To erase the indicators, press again.
Notes on screen indicators
• The screen indicator disappears when the title is displayed.
• When you play back a tape using a "InfoLITHIUM" battery, B indicates the remaining
battery capacity. The remaining battery time in minutes is not displayed.
20
4
REW PLAY
1
DISPLAY
.
.
5
FF REW PLAY
3
POWER
2
OPEN
FF