Using The Fader Function - Sony Handycam Vision DCR-TRV9 Operating Instructions Manual

Using the FADER function

You can fade in or out to give your recording a professional appearance.
When fading in, the picture gradually fades in from black while the sound increases. When fading out,
the picture gradually fades to black while the sound decreases.
When fading in [a]
(1) While the camcorder is in Standby mode, press FADER until the desired indicator
flashes.
(2) Press START/STOP to start recording. The fade indicator stops flashing.
When fading out [b]
(1) During recording, press FADER until the desired indicator flashes.
(2) Press START/STOP to stop recording. The fade indicator stops flashing, and then
recording stops.
[a]
FADER
M.FADER
1
FADER
To cancel the fader function
Before pressing START/STOP, press FADER until the fade indicator disappears.
You cannot use the fader function in the following situations
– The START/STOP MODE switch is set to
– The camcorder is in the photo recording.
– A title is displayed in the viewfinder or on the LCD screen.
STBY
STBY
FADER
M.FADER
REC
REC
ANTI GROUND SHOOTING or 5SEC.
[b]
2
POWER
29