Inserting A Cassette - Sony Handycam Vision DCR-TRV9 Operating Instructions Manual

Inserting a cassette

You can use mini DV cassette with
Make sure that the power source is installed.
(1) Slide EJECT in the direction of the arrow. The cassette lid opens, then the cassette
compartment opens automatically.
(2) Insert a cassette with the window facing out into the cassette compartment.
(3) Close the cassette compartment by pressing the
(4) Close the lid by pressing the
*
1
EJECT
Notes
• When you open the lid immediately after you install the battery, the cassette compartment
may not open. Close the lid and open it again.
• The cassette lid and the cassette compartment may not be closed when you press any part
of the lid other than the
To eject the cassette
Follow the procedure above and in step 2, take out the cassette.
To prevent accidental erasure
Slide and open the tab on the cassette to expose the red mark. If you try to record with the
red mark exposed, the L and 6 indicators flash on the LCD screen or in the viewfinder,
and you cannot record on the tape. To re-record on this tape, slide and close the tab to cover
the red mark.
10
is a trademark.
2
logo* only.
mark until it clicks.
3,4
mark.
mark on the cassette compartment.
3
PUSH
4
PUSH