Releasing The Steadyshot Function - Sony Handycam Vision DCR-TRV9 Operating Instructions Manual

Releasing the STEADYSHOT function

When you shoot, the
indicates that the SteadyShot function is working and the camcorder compensates for
camera-shake.
You can release the SteadyShot function when you do not need to use the SteadyShot
function. Do not use the SteadyShot function when shooting a stationary object with a
tripod.
(1) Press MENU to display the menu on the LCD screen.
(2) Turn the CONTROL dial to select STEADYSHOT, then press the CONTROL dial.
(3) Turn the CONTROL dial to select OFF, then press the CONTROL dial.
(4) Press MENU to erase the menu display.
1,4
MENU
To activate the SteadyShot function again
Select ON in step 3, then press the CONTROL dial.
Notes on the SteadyShot function
• The SteadyShot function will not correct excessive camera-shake.
• When you switch the SteadyShot function on or off, the exposure may fluctuate.
• When the SteadyShot function is released, the
• If you use a tele conversion lens (not supplied) or a wide conversion lens (not supplied),
the SteadyShot function may not work.
indicator appears on the LCD screen or in the viewfinder. This
2
CONTROL
MENU
COMMANDER
REC MODE
AUDIO MODE
D ZOOM
STEADYSHOT
BEEP
TITLEERASE
[ ]
MENU : END
3
CONTROL
MENU
STEADYSHOT
[ ]
MENU : END
MENU
ON
STEADYSHOT
MENU
COMMANDER
REC MODE
AUDIO MODE
D ZOOM
STEADYSHOT
ON BEEP
OFF TITLEERASE
[ ]
MENU : END
indicator does not appear.
CONTROL
ON
OFF
CONTROL
OFF
49