Sony Handycam Vision DCR-TRV9 Operating Instructions Manual page 27

Changing the mode settings
TAPE TITLE
Select this item to label the cassette tape.
AUDIO MIX*
Select this item and adjust the balance between the stereo 1 and stereo 2 by turning the
CONTROL dial.
CM SEARCH <ON/OFF>
• Select ON to search using cassette memory.
• Select OFF to search without using cassette memory.
DATA CODE <DATE/CAM or DATE>
• Select DATE/CAM to display date and recording data during playback.
• Select DATE to display date during playback.
* These settings return to the default 5 minutes or more after the power source is
disconnected or battery is removed. As far as the items without an asterisk are concerned,
their settings are retained even when the power source is disconnected or battery is
removed, as long as the vanadium-lithium battery is charged.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder
may reflect on the subject if it is close. In this case, we recommend you set REC LAMP to
OFF.
Notes
• When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance in
AUDIO MIX.
• If you select 16BIT in AUDIO MODE menu, you cannot add an audio sound.
• If you select BRIGHT in LCD B.L. menu, the battery life while recording becomes 10 to
20% shorter. When you use the power sources except for a battery, the menu item LCD
B.L. is set to BRIGHT automatically and the item does not appear in the screen.
27