Selecting The Mode Setting Of Each Item - Sony Handycam Vision DCR-TRV9 Operating Instructions Manual

Changing the mode settings

Selecting the mode setting of each item

Items for both CAMERA and VTR modes
COMMANDER* <ON/OFF>
• Select ON when using the supplied Remote Commander for the camcorder.
• Select OFF when not using the Remote Commander.
REC MODE <SP/LP>
• Select SP when recording in SP (standard play) mode.
• Select LP when recording in LP (long play) mode.
AUDIO MODE <12BIT/16BIT>
• Normally select 12BIT to record two stereo sound.
• Select 16BIT to record the one stereo sound with high quality.
BEEP <ON/OFF>
• Select ON so that beeps sound when you start/stop recording, etc.
• Select OFF when you do not want to hear the beep sound.
TITLEERASE
Erase the title you have superimposed.
LCD B.L. <BRT NORMAL/BRIGHT>
• Normally select BRT NORMAL.
• Select BRIGHT when the LCD panel is dark.
Even if you adjust the LCD B.L., the recorded picture is not affected.
LCD COLOR
Select this item and change the level of the indicator by turning the CONTROL dial up (+) or
down (–) to adjust the color intensity of the picture.
VF BRIGHT
Close the LCD panel.
Select this item to adjust the brightness of the viewfinder. The viewfinder becomes brighter
when you turn the CONTROL dial up (+), and darker when you turn it down (–).
DISPLAY <LCD or V-OUT/LCD >
• Normally select LCD.
• Select V-OUT/LCD to display indicator both on the LCD panel and TV screen.
AUTO TV ON <ON/OFF>
You can use this feature only with Sony TVs.
• Select ON to turn on the TV automatically when using the LASER LINK function.
• Select OFF not to turn on the TV.
TV INPUT <VIDEO1/VIDEO2/VIDEO3/OFF>
Select 1, 2 or 3 of the video input on the TV which the IR receiver (not supplied) is connected
to when using the LASER LINK function.
25