Resetting The Date And Time - Sony Handycam Vision DCR-TRV9 Operating Instructions Manual

Resetting the date and time

The date and time are set at the factory. Set the time according to the local time in your
country. If you do not use the camcorder for about six months, the date and time settings
may be released (bars may appear) because the vanadium-lithium battery installed in the
camcorder will have been discharged. In this case, first charge the vanadium-lithium
battery, then reset the date and time.
(1) While pressing the small green button on the POWER switch, set it to CAMERA.
(2) Press MENU to display the menu on the LCD screen or in the viewfinder.
(3) Select CLOCK SET, then press the CONTROL dial.
(4) Turn the CONTROL dial to adjust the year, and then press the CONTROL dial.
(5) Set the month, day, hour and minutes by turning and pressing the CONTROL dial.
(6) Press MENU to erase the menu display.
1
POWER
2,6
MENU
CONTROL
4
1998 JAN 1
12 00 AM
To correct the date and time setting
Repeat steps 2 to 5.
The year indicators changes as follows:
1998 1999
Note on the time indicator
The internal clock of this camcorder operates on a 12-hour cycle.
• 12:00 AM stands for midnight.
• 12:00 PM stands for noon.
CONTROL
5
1998 JAN 1
12 00 AM
2029
..... 2001 .....
CONTROL
3
MENU
REC LAMP
N.S. LIGHT
DISPLAY
AUTO TV ON
TV INPUT
CLOCK SET
DEMO MODE
[MENU]:END
CONTROL CONTROL
1998 JUL 1 1998 JUL 4
12 00 AM 12 00 AM
CONTROL CONTROL
CONTROL
MENU
1998 JAN
JAN 1 1998 CLOCK SET
12:00 : 00 AM 12 00 AM
[MENU]:END
CONTROL CONTROL
1998 JUL 4 1998 JUL
5 00 AM 5 30 AM
CONTROL CONTROL
1
4
69