Sony Handycam Vision DCR-TRV9 Operating Instructions Manual page 81

Trouble check
Others
Symptom
While editing using the DV connecting
cable, recording picture cannot be
monitored.
The camcorder becomes warm.
The supplied Remote Commander does
not work.
No function works though the power is
on.
AC power adaptor
Symptom
The VTR/CAMERA or CHARGE lamp
does not light.
The CHARGE lamp flashes.
Cause and/or corrective actions
• Remove the DV connecting cable, and connect it
again.
• If the power of the camcorder is on for a long time, it
becomes warm, which is not malfunction.
• Something is blocking the infrared rays.
m Remove the obstacle.
• The battery is not inserted with the correct polarity.
m Insert the battery with the correct polarity. (p. 89)
• The batteries are dead.
m Insert new ones. (p. 89)
• Disconnect the connection plate on the battery pack or
on the AC power adaptor, then reconnect it in about 1
minute. Turn the power on. If the functions still do
not work, open the LCD panel and press the RESET
button below the MENU button using a sharp-pointed
object. (If you press the RESET button, all the settings
including the date and time return to the default.)
(p. 87)
Corrective actions
• Disconnect the power cord. After about 1 minute,
reconnect the power cord. (p. 7)
• See the chart on the next page.
Continued to the next page
81